Eloma Joker T Operations Instructions download pdf (Page 37)

12.2 Delay start of autoclean

 It is possible to have the cleaning started automatically within a period of up to 24 hours.

Select autoclean on the screen “Special programs” and press sensor key Start Time!

Start Time can be pre-programmed. Press Start/Stop.

 The autoclean program is recorded.

 See Sec. 11.2.1 and make sure, the correct date and time is set.

12.3 Selection and printing of recorded autoclean protocols

 Go to the function HACCP Sec. 10.1.

 Select the week day desired by scrolling and confirm with OK.

 Select the autoclean program to be printed and press sensor key Print.

 Press sensor key Print 7 to have all protocols of the last seven days printed,

including the autoclean programs.

12.4 Manual Cleaning

 Select Autoclean with sensor button.

 Select manual cleaning using Scout  and start it with

 Caution!: manual cleaning begins only at a maximum temperature of max. 60°C/140°F display indicates

 Any burnt on food is softened.

 When the default values are reached, a signal sounds and the

display flashes.

 Open the appliance door and spray the cooking chamber with a cleaning agent by hand.

 Ajar the appliance door and leave the cleaning agent to work.

 Once the cleaning agent has had time to work, a signal sounds and the

display flashes.

Open the door and flush the cooking chamber out thoroughly with water (using the hand shower).

 Ajar the door. The cooking chamber is dried and you should leave its door open afterwards to ensure

good ventilation.

Do not spray cleaning agent in a hot oven cavity.

Use the shower only for rinsing the interior but not for outer surfaces.

In case cleaning agent remains in the cooking chamber, this may cause corrosion problems

Manual

Input

Autoclean

HACCP

Special

back

Start

Time

Program

Info

Help

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

No comments

Eloma Joker T Operations Instructions Page 37